您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 25215-2010 水煤浆试验方法导则

时间:2024-05-06 09:29:19 来源: 标准资料网 作者:标准资料网 阅读:8246
下载地址: 点击此处下载
基本信息
标准名称:水煤浆试验方法导则
英文名称:Guide for testing methods for coal water mixture
中标分类: 矿业 >> 固体燃料矿 >> 煤炭分析方法
ICS分类: 石油及相关技术 >> 燃料
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2010-09-26
实施日期:2011-02-01
首发日期:2010-09-26
作废日期:
主管部门:中国煤炭工业协会
提出单位:中国煤炭工业协会
归口单位:全国煤炭标准化技术委员会
起草单位:煤炭科学研究总院煤炭分析实验室
起草人:韩立亭、施玉英
出版社:中国标准出版社
出版日期:2011-02-01
页数:8页
适用范围

  本标准规定了水煤浆试样的采取、制备、测定方法、结果换算和结果报告。本标准适用于水煤浆。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T212 煤的工业分析方法(GB/T212—2008,ISO11722:1999,Solidmineralfuels—Hardcoal—Determinationofmoistureinthegeneralanalysistestsamplebydryinginnitrogen;ISO1171:1997,Solidmineralfuels—Determinationofash;ISO562:1998,Hardcoalandcoke—Determinationofvolatilematter,NEQ)
GB/T213 煤的发热量测定方法(GB/T213—2008,ISO1928:1995,SolidmineralfuelsDeterminationofgrosscalorificvaluebythebombcalorimetricmethodandcalculationofnetcalorificvalue,MOD)
GB/T214 煤中全硫的测定方法(GB/T 214—2007,ISO 334:1992,Solid mineralfuels—Determinationoftotalsulfur—Eschkamethod;ISO351:1996,Solidmineralfuels—Determinationoftotalsulfur—Hightemperaturecombustionmethod,NEQ)
GB/T219 煤灰熔融性测定方法(GB/T 219—2008,ISO 540:1995,Solid mineralfuels—Determinationoffusibilityofash—High-temperaturetubemethod,MOD)
GB/T476 煤中碳和氢的测定方法(GB/T476—2008,ISO625:1996,Solidmineralfuels—Determinationofcarbonandhydrogen—Liebigmethod,MOD)
GB/T1574 煤灰成分分析方法
GB/T18856.1 水煤浆试验方法 第1部分:采样
GB/T18856.2 水煤浆试验方法 第2部分:浓度测定
GB/T18856.3 水煤浆试验方法 第3部分:筛分试验
GB/T18856.4 水煤浆试验方法 第4部分:表观黏度测定
GB/T18856.5 水煤浆试验方法 第5部分:稳定性测定
GB/T18856.6 水煤浆试验方法 第6部分:密度测定
GB/T18856.7 水煤浆试验方法 第7部分:pH 值测定
GB/T19227 煤中氮的测定方法(GB/T19227—2008,ISO333:1996,Coal—Determinationofnitrogen—Semi-microKjeldahlmethod,MOD;

所属分类: 矿业 固体燃料矿 煤炭分析方法 石油及相关技术 燃料
基本信息
标准名称:联锁车钩连接轮廓
中标分类: 铁路 >> 机车车辆通用标准 >> 车钩与缓冲装置
替代情况:被TB/T 2950-2006代替
发布日期:1999-02-13
实施日期:1999-09-01
首发日期:
作废日期:2006-07-01
出版日期:
页数:5页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 铁路 机车车辆通用标准 车钩与缓冲装置
Product Code:SAE ARP1527
Title:Color Coding - Elastomers for Tube Clamp Cushions
Issuing Committee:G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Scope:This Aerospace Recommended Practice (ARP) establishes uniform requirements for color coding of elastomeric cushions on clamps used in aerospace tubing systems, wire bundle retention, and similar applications. The application of color codes to tube clamps as an indicator of the type of service for which the clamps are intended should facilitate correct application, as well as detection of misapplication of clamps. When installed in an aerospace system, detection of an incorrect clamp by part number is quite difficult. Implementation of this ARP is appropriate because of recently developed elastomer compounds which have better strength, fluid resistance, corrosion resistance, temperature range, etc., than previously available, especially in non-black compounds. This permits a relatively few colors to cover most applications, minimizing the number of specials or exceptions which would tend to reduce the advantages of the color-code system.